Probes ALPA LA300 for LA250/LA255 roughness testers
Characteristics- To measure in inaccessible spots or special profiles can be mounted special probe. The page shows the most used. Specific probes can be designed and manufactured for special needs.
Drawings
Variations
Code
Description
LA300C
Description
Probe without skid sloping diamond Suitable curve, incline surface or shoulder
LA300LA
Description
Probe without skid with pyramidal diamond for measure blades, wires and edge like cutting tools
LA30001A
Description
"V" skid, for wires, and cylinders with external Ø more than 1 mm
LA30001B
Description
"V" skid, for wires, and cylinders with external Ø more than 1 mm
LA30002
Description
Probe without skid for little bores, minimum Ø 2 mm
LA30004
Description
Probe with removable skid for roughness and waviness measures or bore with Ø than 4 mm
LA30005CA
Description
For concave and convex surfaces with minimum radius of 5 mm
LA30005CB
Description
For concave and convex surfaces with minimum radius of 5 mm
LA30005PA
Description
For plane surfaces, grooves and shoulders with deep up to 5 mm
LA30005PB
Description
For plane surfaces, grooves and shoulders with deep up to 5 mm
LA30010A
Description
Standard probe for plane surfaces or Ø internal external large then of 10 mm R= 5μm
LA30010B
Description
Standard probe for plane surfaces or Ø internal external large then of 10 mm R= 5μm
LA30020GA
Description
Or grooves and shoulders with depth up to 20 mm
LA30020GB
Description
Or grooves and shoulders with depth up to 20 mm
LA30090A
Description
With anterior skid, for plane or curve surfaces, ideal for measure at 90°
LA30090B
Description
With anterior skid, for plane or curve surfaces, ideal for measure at 90°
LA300100
Description
Extension 100 mm
Request information
Fill in the fields below to get information about this product